Sales Department: 0731-85504084
Pre-sales engineer - Liu Gong: 18975111384
Pre-sales engineer - Yang Gong: 18975134580
Ministry of Foreign Trade: 0731-85504584
After-sales department: 0731-85534084


Address: No.179, Huizhi Middle Road, High-tech Development Zone, Changsha City
104-604, Building D, Jinrong Tongxin International Industrial Park

Contact us

Social media

Copyright:Hunan Charmhigh Electromechanical Co., Ltd. 备案号:湘ICP备18021313号-1 



CHM-T560P4parameters Parameters ModelCHMT560P4XYZAxistravel600mm(X)×630mm(Y)×20mm(Z)PCBmaxsize400mm(L)×270mm(W)Supportcomponents0402~5050,SOP,QFN,BGAetc.Mountingspeed·        Withoutvision:8500cph·
Product description
Online message
CHM-T560P4 parameters





XYZ Axis travel


PCB max size


Support components

0402~5050, SOP, QFN,BGA etc.

Mounting speed

·         Without vision:8500cph

·         With Vision:6600cph



Placement head

4 heads

Feeding system

Support max 60pcs feeder

·         11pcs general IC stack

·         Support self-defined IC tray

Vision detection

Double camera (up & down)

Motor control

·         XY Axis stepper motor with encoder closed-loop control

·         Flexible S deceleration

·         Z Axis reset detection

Components leakage detection

Vacuum and visual detection

Main board

High-reliability industry motherboard

Touch Screen

7 inches industry screen

Operation system

Embedded Linux system

Vacuum detection

2pcs (in-build) mute type pump (-92KPa)

Power supply

AC220V 50Hz / AC110V 60Hz

Air supply






Net weight


Machine description:
CHMT530P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHMT530P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy. 
60pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T560P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime.  pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder. 
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement. 
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient. 
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly. 
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour. 
Mark point auto calibration
more accurate with vision system
After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation. 
Front IC Bulk Material Area
11pcs front bulk IC stack, suitable for some bulk ICs. more convenient. 
IC Tray Supported
software allow 20 user-defined IC tray
User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking.
Package Weight: 170.0kg
Package Size: 130cm x 96cm x 82cm
Packing: wooden case (safe packing)
Corresponding parameter set not found, please add it in property template of background

If you have an interest, please leave a message or contact us through the following ways!

Key words
Previous article
Next article