Sales Department: 0731-85504084
Pre-sales engineer - Liu Gong: 18975111384
Pre-sales engineer - Yang Gong: 18975134580
Ministry of Foreign Trade: 0731-85504584
After-sales department: 0731-85534084


Address: No.179, Huizhi Middle Road, High-tech Development Zone, Changsha City
104-604, Building D, Jinrong Tongxin International Industrial Park

Contact us

Social media

Copyright:Hunan Charmhigh Electromechanical Co., Ltd. 备案号:湘ICP备18021313号-1 



CHM-T510LP4 is an professional LED design pick and place machine.
Product description
Online message
CHM-T510LP4 parameters

 x, y, z axis stroke


 PCB area


 EX axis stroke


 Component support


 Material support

 YAMAHA CL feeder


 AC220V 50Hz/AC110V 60Hz


 L 2050mm*W 600mm*H 800mm

 Need external PC

 With quality industrial PC



 Air Supply


 Net weight




 Mount speed

 do not use the visual:11000cph
use visual:6500cph(cph is chip per hour) 

 PCB Fixed mode 

 Magnetic plate positioning

 SMT precision


 Material system

 8pcs Feeders 

 Controlling system

 XY axis with motor for driving, Z axis with reset detection

 All motors with S flexibility lower or faster speed

 Compatible  operation

 Embedded Linux system

 Vacuum detection

 2pcs(in-built)mute type pump ,(-92Kpa)

 Leak detection

 Vacuum detection, visual detection 

 Visual system

Up camera automatic adjust(max22mm*22mm)

Down camera PCB automatic MARK adjust 

Machine description:
CHM-T510LP4 is an professional LED design pick and place machine. with 1.2M moving table, it has 4heads and 8pcs Yamaha feeders.  
This machine is not only for LED patching work, also can work with 0402. 0603, 0805-5050, SOP, QFN, LQFP, Diode, Transistor. 
within embedded industry PC and Linux system. the main board of the machine was developed by ourselves, with good quality and long lifetime. Please buy with confidence. 
Automatic of EX axis
High speed movement can assemble a PCB of 1200mm length
High speed movement, highly accurate
Magnetic plate positioning
Check make point visually and automatically, effective and accurate
EX axis covered by magnetic plate, can suitable for various PCB of different size and shape, precise positioning, good performance, easy operation
8pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T510LP4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime.  pneumatic feeders can improve the working efficient a lot.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly. 
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement. 
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient. 
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Package Weight: 190.0kg
Package Size: 137cm x 81cm x 82cm
Packing: wooden case (safe packing)
Corresponding parameter set not found, please add it in property template of background

If you have an interest, please leave a message or contact us through the following ways!

Key words
Previous article
Next article